| # | QTY | Cabinet / Acc. Descripton | HIN | F-E | SPECIAL INFORMATION | - |
| CEE72513T | ||||||
| 1 | 1 | WSC1554 | ||||
| 1 | **MOD3 [ Change Three Dimensions ] | Change Width to 6 inch. Change Height to 51 inch. Change Depth to 18 inch. | ||||
| 1 | **MOD1D [ Change Depth ] | |||||
| 1 | **RPEW | Raised Panel End Right
Panel Type: DO7000 . Panel: 18 x 51 Inch | ||||
| 1 | ** BIM [Beaded Inset Moulding] | |||||
***** SPECIAL DRAWING ***** | ||||||
| 2 | 1 | WSC1554 | ||||
| 1 | **MOD3 [ Change Three Dimensions ] | Change Width to 6 inch. Change Height to 51 inch. Change Depth to 18 inch. | ||||
| 1 | **MOD1D [ Change Depth ] | |||||
| 1 | **RPEW | Raised Panel End Left
Panel Type: DO7000 . Panel: 18 x 51 Inch | ||||
| 1 | ** BIM [Beaded Inset Moulding] | |||||
***** SPECIAL DRAWING ***** | ||||||
| 3 | 1 | ABFHD12R | R | Right side 12 inch deep | ||
| 1 | **MOD8 [ Toe Kick(Back or End) ] | Toe kick right | ||||
| 1 | ** MOD22 [Full Overlay] | |||||
| 1 | ** BIM [Beaded Inset Moulding] | |||||
| 1 | **Opening Front: DO700 | R | ||||
***** SPECIAL CUTLIST ***** | ||||||
| 4 | 1 | RPEB (12in x 34 1/2in ) **Panel Size: 12 x 34 1/2 Inches | Raised Panel End Right
Toeboard: No. | |||
| 1 | ** BIM [Beaded Inset Moulding] | |||||
| **DO700 | ||||||
| 5 | 1 | ABFHD12L | L | Left side 12 inch deep
| ||
| 2 | **MOD8 [ Toe Kick(Back or End) ] | Toe kick back
Toe kick left Needs separate toe base | ||||
| 1 | ** MOD22 [Full Overlay] | |||||
| 1 | ** BIM [Beaded Inset Moulding] | |||||
| 1 | **Opening Front: DO700 | L | ||||
***** SPECIAL CUTLIST ***** | ||||||
| 6 | 1 | RPEB (12in x 34 1/2in ) **Panel Size: 12 x 34 1/2 Inches | Raised Panel End Left
Toeboard: No. | |||
| 1 | ** BIM [Beaded Inset Moulding] | |||||
| **DO700 | ||||||
| 7 | 1 | DO312496 | R |
Oven Floor loose?: No. | ||
| 1 | **MOD9 [ Flush Toe Kick ] | |||||
| 1 | **TFE | Finished End Right | ||||
| 1 | **RPET | Raised Panel End Left
Panel Type: DO7006 . Panel: 24 x 96 Inch | ||||
| 3 | ** MOD22 [Full Overlay] | |||||
| 1 | ** MOD24 [Blumotion Drawer Slides] | |||||
| 1 | ** MOD38 [Dovetail Drawer Box ] | |||||
| 4 | ** BIM [Beaded Inset Moulding] | |||||
| 2 | **Opening Front: DO700 | |||||
| 1 | **Opening Front: TD | TD right
Distance from inside of faceframe opening: 3 inch | ||||
| 1 | **Opening Front: TD | TD right
Distance from inside of faceframe opening: 6 inch | ||||
| **Double Oven: | Oven Opening Dimensions: 28 1/2 x 51 | |||||
| 1 | **Drawer Bottom: DO5410 | |||||
| 8 | 1 | DO312496 | W: 31 x H: 96 x D: 24 Opening #1 (Opening Front): - Height: 27 - 2 doors (DO700), french hung Opening #2 (Double Oven): - Width: 28 1/2 Height: 46 1/2 Opening #3 (Drawer Bottom): - Height: 10 - 1 drawer (DO5410) - Dovetail drawer box Oven Floor loose?: No. | |||
| 1 | **MOD9 [ Flush Toe Kick ] | |||||
| 1 | **MOD11 [ Extend stile or rail (up to 6 inch) ] | Extend right stile
Extend by 1 inch | ||||
| 1 | **RPET | Raised Panel End Left
Panel Type: DO7006 . Panel: 24 x 96 Inch | ||||
| 3 | ** MOD22 [Full Overlay] | |||||
| 1 | ** MOD24 [Blumotion Drawer Slides] | |||||
| 1 | ** MOD38 [Dovetail Drawer Box ] | |||||
| 4 | ** BIM [Beaded Inset Moulding] | |||||
| 2 | **Opening Front: DO700 | |||||
| 1 | **Opening Front: TD | TD right
Distance from inside of faceframe opening: 3 inch | ||||
| 1 | **Opening Front: TD | TD right
Distance from inside of faceframe opening: 6 inch | ||||
| **Double Oven: | Oven Opening Dimensions: 28 1/2 x 46 1/2 | |||||
| 1 | **Drawer Bottom: DO5410 | |||||
***** SPECIAL DRAWING ***** | ||||||
| 9 | 1 | REFR 34 1/2in x 8 1/2in (2.04 sqft each) | No plywood needed ( DO7200 ) | |||
| Panel Dimensions: 34 1/2 in X 8 1/2in | ||||||
| 1 | ** BIM [Beaded Inset Moulding] | |||||
| **DO7200 | ||||||
| Changed to two-panel | ||||||
| 10 | 1 | REFR 34 1/2in x 50in (11.98 sqft each) | No plywood needed ( DO7202 ) | |||
| Panel Dimensions: 34 1/2 in X 50in | ||||||
| 1 | ** BIM [Beaded Inset Moulding] | |||||
| **DO7202 | ||||||
| Changed to two-panel | ||||||
| 11 | 1 | REFR 34 1/2in x 20 1/16in (4.81 sqft each) | No plywood needed ( DO7200 ) | |||
| Panel Dimensions: 34 1/2 in X 20 1/16in | ||||||
| 1 | ** BIM [Beaded Inset Moulding] | |||||
| **DO7200 | ||||||
| Changed to two-panel | ||||||
| 12 | 1 | DWRP 25 1/2in x 30in (5.31 sqft each) | No plywood needed ( DO7200 ) | |||
| Panel Dimensions: 25 1/2 in X 30in | ||||||
| 1 | ** BIM [Beaded Inset Moulding] | |||||
| **DO7200 | ||||||
| Changed to two-panel | ||||||
| Maple | ||||||
| Biscuit/ Choc. Glaze | ||||||
| 6 Cabinets 6 Accessories | CEE72513T Rev#: 39 | |||||
| CEE72514W | ||||||
| 1 | 1 | W3642 | W: 36 x H: 48 x D: 15 Opening #1 (* Opening Top): - Height: 15 - 2 doors (DO411), french hung Opening #2 (* *Opening Bottom): Open changed to: Door, french hung - Height: 28 1/2 - 2 doors (DO700), french hung | |||
| 1 | **MOD3 [ Change Three Dimensions ] | Change Height to 48 inch. Change Depth to 15 inch. | ||||
| 1 | **MOD1D [ Change Depth ] | |||||
| 1 | **MOD31 [ Stained Interior ] | |||||
| 4 | ** MOD22 [Full Overlay] | |||||
| 4 | ** BIM [Beaded Inset Moulding] | |||||
| 2 | *** Opening Top: DO411 | |||||
| 1-1a | 4 | BIMPFG - 17 3/4 inch | BIM for prep. for glass door | |||
| 1-1b | 4 | BIMPFG - 16 1/2 inch | BIM for prep. for glass door | |||
| 2 | *** *Opening Bottom: DO700 | |||||
***** SPECIAL DRAWING ***** | ||||||
| 2 | 1 | W1842LL | LL | R | W: 18 x H: 48 x D: 15 Opening #1 (* Opening Top): - Height: 15 - 1 door (DO411), hinged L Opening #2 (* *Opening Bottom): Open changed to: Door, single - Height: 28 1/2 - 1 door (DO700), hinged L | |
| 1 | **MOD3 [ Change Three Dimensions ] | Change Height to 48 inch. Change Depth to 15 inch. | ||||
| 1 | **MOD1D [ Change Depth ] | |||||
| 1 | **MOD31 [ Stained Interior ] | |||||
| 1 | **WFE | Finished End Right | ||||
| 2 | ** MOD22 [Full Overlay] | |||||
| 2 | ** BIM [Beaded Inset Moulding] | |||||
| 1 | *** Opening Top: DO411 | L | ||||
| 2-1a | 2 | BIMPFG - 17 1/2 inch | BIM for prep. for glass door | |||
| 2-1b | 2 | BIMPFG - 16 1/2 inch | BIM for prep. for glass door | |||
| 1 | *** *Opening Bottom: DO700 | L | ||||
***** SPECIAL DRAWING ***** | ||||||
| 3 | 1 | W1842RL | RL | L | W: 18 x H: 48 x D: 15 Opening #1 (* Opening Top): - Height: 15 - 1 door (DO411), hinged R Opening #2 (* *Opening Bottom): Open changed to: Door, single - Height: 28 1/2 - 1 door (DO700), hinged L | |
| 1 | **MOD3 [ Change Three Dimensions ] | Change Height to 48 inch. Change Depth to 15 inch. | ||||
| 1 | **MOD1D [ Change Depth ] | |||||
| 1 | **MOD31 [ Stained Interior ] | |||||
| 1 | **WFE | Finished End Left | ||||
| 2 | ** MOD22 [Full Overlay] | |||||
| 2 | ** BIM [Beaded Inset Moulding] | |||||
| 1 | *** Opening Top: DO411 | R | ||||
| 3-1a | 2 | BIMPFG - 17 1/2 inch | BIM for prep. for glass door | |||
| 3-1b | 2 | BIMPFG - 16 1/2 inch | BIM for prep. for glass door | |||
| 1 | *** *Opening Bottom: DO700 | L | ||||
***** SPECIAL DRAWING ***** | ||||||
| 4 | 1 | W3642 | W: 36 x H: 48 x D: 15 Opening #1 (* Opening Top): - Height: 15 - 2 doors (DO411), french hung Opening #2 (* *Opening Bottom): Open changed to: Door, french hung - Height: 28 1/2 - 2 doors (DO700), french hung | |||
| 1 | **MOD3 [ Change Three Dimensions ] | Change Height to 48 inch. Change Depth to 15 inch. | ||||
| 1 | **MOD1D [ Change Depth ] | |||||
| 1 | **MOD31 [ Stained Interior ] | |||||
| 4 | ** MOD22 [Full Overlay] | |||||
| 4 | ** BIM [Beaded Inset Moulding] | |||||
| 2 | *** Opening Top: DO411 | |||||
| 4-1a | 4 | BIMPFG - 17 3/4 inch | BIM for prep. for glass door | |||
| 4-1b | 4 | BIMPFG - 16 1/2 inch | BIM for prep. for glass door | |||
| 2 | *** *Opening Bottom: DO700 | |||||
***** SPECIAL DRAWING ***** | ||||||
| 5 | 1 | W3612 | ||||
| 1 | **MOD1D [ Change Depth ] | Change Depth to 24 inches | ||||
| 2 | ** MOD22 [Full Overlay] | |||||
| 2 | ** BIM [Beaded Inset Moulding] | |||||
| 2 | **Opening Front: DO700 | |||||
| 6 | 1 | B3D36 | ||||
| 3 | ** MOD22 [Full Overlay] | |||||
| 3 | ** MOD24 [Blumotion Drawer Slides] | |||||
| 3 | ** MOD38 [Dovetail Drawer Box ] | |||||
| 3 | ** BIM [Beaded Inset Moulding] | |||||
| 1 | **Drawer Top: DO5410 | |||||
| 1 | **Drawer Middle: DO5410 | |||||
| 1 | **Drawer Bottom: DO5410 | |||||
| 7 | 1 | B3D21 | ||||
| 3 | ** MOD22 [Full Overlay] | |||||
| 3 | ** MOD24 [Blumotion Drawer Slides] | |||||
| 3 | ** MOD38 [Dovetail Drawer Box ] | |||||
| 3 | ** BIM [Beaded Inset Moulding] | |||||
| 1 | **Drawer Top: DO5410 | |||||
| 1 | **Drawer Middle: DO5410 | |||||
| 1 | **Drawer Bottom: DO5410 | |||||
| 8 | 1 | B3D36 | ||||
| 1 | **MOD6 [ Change Three Dimensions ] | Change Width to 42 inch. Change Depth to 27 inch. | ||||
| 1 | **MOD1D [ Change Depth ] | |||||
| 1 | **MOD37 [ 3 Inch Clipped Corner Right and Left ] | Smooth clipped corner. | ||||
| 1 | **MOD63 [ Change Valance to Toe Kick or Top Rail(Valance not Included) ] | Use valance as flush toekick with std. toekick behind. Toekick not installed, needs to be installed in the field. | ||||
| 1 | **ARV | Used with MOD63 (toekick) | ||||
| 3 | ** MOD22 [Full Overlay] | |||||
| 3 | ** MOD24 [Blumotion Drawer Slides] | |||||
| 3 | ** MOD38 [Dovetail Drawer Box ] | |||||
| 3 | ** BIM [Beaded Inset Moulding] | |||||
| 1 | **Drawer Top: DO5410 | |||||
| 1 | **Drawer Top: MOD21S [ Scoop Drawer ] | |||||
| 1 | **Drawer Middle: DO5410 | |||||
| 1 | **Drawer Bottom: DO5410 | |||||
***** SPECIAL DRAWING ***** | ||||||
| 9 | 1 | B3D21 | ||||
| 3 | ** MOD22 [Full Overlay] | |||||
| 3 | ** MOD24 [Blumotion Drawer Slides] | |||||
| 3 | ** MOD38 [Dovetail Drawer Box ] | |||||
| 3 | ** BIM [Beaded Inset Moulding] | |||||
| 1 | **Drawer Top: DO5410 | |||||
| 1 | **Drawer Middle: DO5410 | |||||
| 1 | **Drawer Bottom: DO5410 | |||||
| 10 | 1 | B3D36 | ||||
| 3 | ** MOD22 [Full Overlay] | |||||
| 3 | ** MOD24 [Blumotion Drawer Slides] | |||||
| 3 | ** MOD38 [Dovetail Drawer Box ] | |||||
| 3 | ** BIM [Beaded Inset Moulding] | |||||
| 1 | **Drawer Top: DO5410 | |||||
| 1 | **Drawer Middle: DO5410 | |||||
| 1 | **Drawer Bottom: DO5410 | |||||
| 11 | 1 | TA96 |
No stained interior | |||
| 1 | **MOD64 [ Invert Face Frame ] | |||||
| 1 | **MOD9 [ Flush Toe Kick ] | |||||
| 4 | ** MOD22 [Full Overlay] | |||||
| 4 | ** BIM [Beaded Inset Moulding] | |||||
| 2 | **Opening Diagonal Bottom: DO700 | |||||
| 2 | **Opening Diagonal Top: DO4110 | Style changed due to size-restrictions | ||||
| 11-2a | 8 | BIMPFG - inch | BIM for prep. for glass door | |||
| 11-2b | 4 | BIMPFG - 62 1/2 inch | BIM for prep. for glass door | |||
***** SPECIAL DRAWING ***** | ||||||
| 12 | 1 | U302496 | ||||
| 1 | **MOD9 [ Flush Toe Kick ] | |||||
| 1 | **MOD11 [ Extend stile or rail (up to 6 inch) ] | Extend left stile
Extend by 1 inch | ||||
| 1 | **MOD64 [ Invert Face Frame ] | |||||
| 1 | **MOD25D | Remove Mullion 1 Side | ||||
| 4 | ** MOD22 [Full Overlay] | |||||
| 4 | ** BIM [Beaded Inset Moulding] | |||||
| 2 | **Opening Front Bottom: DO700 | |||||
| 1 | **Opening Front Bottom: MOD25D [ Remove Center Mullion ] | |||||
| 3 | **Opening Front Bottom: ROT | Install ROT below adj. shelves | ||||
| 2 | **Opening Front Top: DO7000 | Style changed due to size-restrictions | ||||
| 1 | **Opening Front Top: MOD25D [ Remove Center Mullion ] | |||||
***** SPECIAL DRAWING ***** | ||||||
| 13 | 5 | J124 Insert Crown Moulding | ||||
| 14 | 3 | LM Light Moulding | ||||
| 15 | 4 | TK Toe Kick | ||||
| 16 | 4 | SM Scribe Moulding | ||||
| 17 | 1 | TUK Touch Up Kit | ||||
| 18 | 2 | FB Furniture Base Moulding | ||||
| 19 | 1 | GLQT Glaze, Quart | ||||
| 20 | 1 | PAQT Paint, Quart | ||||
| 21 | 4 | BIM (96 inch) | ||||
| 22 | 1 | CQC SPECIAL CUSTOM RANGE HOOD WITH MANTLE **OVERALL DIMENSIONS WITHOUT MANTLE 60 X 18 X 60 **DEPTH WITH MANTLE IS 21 INCHES **FRONT OF HOOD TO BE BBRP **42 X 41-3/8 SPECIAL DOBSIP110 **SPECIAL ARV AS BOTTOM RAIL **ALL PIECES SHIP SEPARATE **********SPECIAL CUTLIST----SPECIAL DRAWING | W6VL000W-GKJM-FF | |||
| Maple | ||||||
| Biscuit/ Choc. Glaze | ||||||
| 13 Cabinets 25 Accessories | CEE72514W Rev#: 25 | |||||
| # | QTY | Cabinet / Acc. Descripton | HIN | F-E | SPECIAL INFORMATION | - |
| CEE72519W | ||||||
| 1 | 1 | VSC60AL | L | Back has horizontal grain due to size. | ||
| 1 | **MOD1D [ Change Depth ] | Change Depth to 24 inches | ||||
| 2 | **MOD8 [ Toe Kick(Back or End) ] | Toe kick back
Toe kick right Needs separate toe base | ||||
| 1 | **MOD60 [ Package Wrap Wall or Base ] | |||||
| 1 | **RPEV | Raised Panel End Right
Panel Type: DO700 . Panel: 24 x 27 1/2 Inch | ||||
| 10 | ** MOD22 [Full Overlay] | |||||
| 8 | ** MOD24 [Blumotion Drawer Slides] | |||||
| 1 | **Drawer Top Left(1): DO500 | |||||
| 1 | **False Front Top Middle: DO500 | |||||
| 1 | **Drawer Top Right(1): DO500 | |||||
| 1 | **Drawer Middle Left(2): DO500 | |||||
| 1 | **Drawer Middle Left(3): DO500 | |||||
| 1 | **Drawer Bottom Left(4): DO500 | |||||
| 1 | **Opening Front: DO700 | L | ||||
| 1 | **Drawer Middle Right(2): DO500 | |||||
| 1 | **Drawer Middle Right(3): DO500 | |||||
| 1 | **Drawer Bottom Right(4): DO500 | |||||
| 2 | 1 | VSC60AL | L | Back has horizontal grain due to size. | ||
| 2 | **MOD8 [ Toe Kick(Back or End) ] | Toe kick back
Toe kick left Needs separate toe base | ||||
| 1 | **MOD60 [ Package Wrap Wall or Base ] | |||||
| 1 | **RPEV | Raised Panel End Left
Panel Type: DO700 . Panel: 24 x 27 1/2 Inch (3 inch deeper than cabinet) | ||||
| 10 | ** MOD22 [Full Overlay] | |||||
| 8 | ** MOD24 [Blumotion Drawer Slides] | |||||
| 1 | **Drawer Top Left(1): DO500 | |||||
| 1 | **False Front Top Middle: DO500 | |||||
| 1 | **Drawer Top Right(1): DO500 | |||||
| 1 | **Drawer Middle Left(2): DO500 | |||||
| 1 | **Drawer Middle Left(3): DO500 | |||||
| 1 | **Drawer Bottom Left(4): DO500 | |||||
| 1 | **Opening Front: DO700 | L | ||||
| 1 | **Drawer Middle Right(2): DO500 | |||||
| 1 | **Drawer Middle Right(3): DO500 | |||||
| 1 | **Drawer Bottom Right(4): DO500 | |||||
| 3 | 6 | BUN5574 Bun Foot | ||||
| 4 | 1 | WFC1254 | ||||
| 1 | **MOD60 [ Package Wrap Wall or Base ] | |||||
***** SPECIAL DRAWING ***** | ||||||
| 5 | 1 | WFC1254 | ||||
| 1 | **MOD60 [ Package Wrap Wall or Base ] | |||||
***** SPECIAL DRAWING ***** | ||||||
| 6 | 1 | WFC1254 | ||||
| 1 | **MOD60 [ Package Wrap Wall or Base ] | |||||
***** SPECIAL DRAWING ***** | ||||||
| 7 | 1 | WFC1254 | ||||
| 1 | **MOD60 [ Package Wrap Wall or Base ] | |||||
***** SPECIAL DRAWING ***** | ||||||
| 8 | 2 | ARV54 Arch Valance | Width: 54 Inches. | |||
| 9 | 2 | TK Toe Kick | ||||
| 10 | 1 | TUK Touch Up Kit | ||||
| 11 | 2 | SM Scribe Moulding | ||||
| 12 | 2 | SLCM Large Crown Moulding | ||||
| 13 | 1 | F684 (6 x 84 x 3/4) Filler | ||||
| Maple | ||||||
| Salem Maple/ Choc. Glaze | ||||||
| 6 Cabinets 16 Accessories | CEE72519W Rev#: 8 | |||||